Banks Power Charge Pipe Kit for Chevy Silverado & GMC Sierra 2500 / 3500 6.6L (2017-2019) Cold & Hot Side Boost Tubes 25999
Banks Power Charge Pipe Kit for Chevy Silverado & GMC Sierra 2500 / 3500 6.6L (2017-2019) Cold & Hot Side Boost Tubes 25999
Fitment Information
- Chevy Silverado & GMC Sierra 2500 / 3500 6.6L (2017, 2018, 2019)
Emissions Compliance
- This product is covered by CARB Executive Order D-161-155 and is legal for use in all 50 states, including California. It does not affect factory emissions systems when installed as intended.
Specs & Features
-
3.5" Constant Diameter Charge Pipes – Larger than stock 2.5" for maximum airflow
-
+87% Airflow Increase – Moves up to 680 CFM vs 364 CFM stock
-
Billet Venturi Couplers – Helps maintain boost pressure and improve efficiency
-
Faster Turbo Spool – Reduced restriction improves response and power delivery
-
Mandrel-Bent Aluminized Steel – Smooth bends for better flow and durability
-
5-Ply Heavy-Duty Silicone Couplers – Built to handle high boost without failure
-
Constant Tension Clamps – Keeps connections sealed under pressure
-
Greater Cooling Capacity – Helps manage intake temps and reduce heat soak
-
Stronger Than Stock – Replaces weak plastic factory components
- Optimized Fitment – Designed to fit tight engine bay without sacrificing flow
Product Description
Factory charge pipes are smaller, restrictive, and not built for serious airflow—especially once you start pushing more boost. This Banks kit jumps to a full 3.5-inch constant diameter setup, moving up to 87% more air and flowing 680 CFM compared to stock. That means less pressure loss, better boost retention, and more efficient airflow from the turbo to the intake. The result is quicker spool, stronger throttle response, and more usable horsepower without forcing the system to work harder.
Banks didn’t just make it bigger—they made it smarter and stronger. The billet venturi couplers help keep boost pressure consistent, while the aluminized steel construction holds up better than stock plastic pipes that are known to crack over time. Add in heavy-duty silicone couplers and constant tension clamps, and you’ve got a setup that stays sealed under pressure. If you’re serious about airflow, reliability, and getting the most out of your setup, this is one of those upgrades that makes everything work the way it should.
Redline360 sells only genuine and authentic Banks Power products.
Description
Fitment Information
- Chevy Silverado & GMC Sierra 2500 / 3500 6.6L (2017, 2018, 2019)
Emissions Compliance
- This product is covered by CARB Executive Order D-161-155 and is legal for use in all 50 states, including California. It does not affect factory emissions systems when installed as intended.
Specs & Features
-
3.5" Constant Diameter Charge Pipes – Larger than stock 2.5" for maximum airflow
-
+87% Airflow Increase – Moves up to 680 CFM vs 364 CFM stock
-
Billet Venturi Couplers – Helps maintain boost pressure and improve efficiency
-
Faster Turbo Spool – Reduced restriction improves response and power delivery
-
Mandrel-Bent Aluminized Steel – Smooth bends for better flow and durability
-
5-Ply Heavy-Duty Silicone Couplers – Built to handle high boost without failure
-
Constant Tension Clamps – Keeps connections sealed under pressure
-
Greater Cooling Capacity – Helps manage intake temps and reduce heat soak
-
Stronger Than Stock – Replaces weak plastic factory components
- Optimized Fitment – Designed to fit tight engine bay without sacrificing flow
Product Description
Factory charge pipes are smaller, restrictive, and not built for serious airflow—especially once you start pushing more boost. This Banks kit jumps to a full 3.5-inch constant diameter setup, moving up to 87% more air and flowing 680 CFM compared to stock. That means less pressure loss, better boost retention, and more efficient airflow from the turbo to the intake. The result is quicker spool, stronger throttle response, and more usable horsepower without forcing the system to work harder.
Banks didn’t just make it bigger—they made it smarter and stronger. The billet venturi couplers help keep boost pressure consistent, while the aluminized steel construction holds up better than stock plastic pipes that are known to crack over time. Add in heavy-duty silicone couplers and constant tension clamps, and you’ve got a setup that stays sealed under pressure. If you’re serious about airflow, reliability, and getting the most out of your setup, this is one of those upgrades that makes everything work the way it should.
Redline360 sells only genuine and authentic Banks Power products.
