Bilstein B8 5100 Shocks Ram 2500 (14-25) Rear [Rear Axle Anti-Wrap Power Hop Shock Absorber] 24-274395

BILSTEIN B8 5100 RIDE HEIGHT ADJUSTABLE. THE PERFECT HEIGHT.

Fitment Information

• Ram 2500 (All Trims): (2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025)
• Drive Type: 4WD (Four-Wheel Drive)
• Chassis Note: Fits vehicles equipped with the factory rear axle anti-wrap/power hop damper system.

Fitment Note: Bilstein 24-274395 is not a primary suspension shock; it is a horizontal/diagonal damper located near the rear differential. You're required to verify your vehicle was factory-equipped with this "fifth shock" system, as additional mounting plates and hardware are needed if adding it to a truck not originally equipped. While it is verified through the 2025 model year, you should always check for clearance if you have installed an aftermarket high-capacity differential cover.

Adjustability & Range

• Reservoir: No
  
• Body Design: Smooth Body (Non-coilover)
  
• Boot Included: Black Bellows
  
• Extended Length (MM): 679.5
  
• Body Diameter (ID): 46mm
  
• Collapsed Length (MM): 433.8
  
• Upper Mount Type: Stem
  
• Internal Design: Monotube
  
• Lower Mount Type: Eye 14.1mm
  
• Extended Length (IN): 26.75
  
• Collapsed Length (IN): 17.08
  
• Finish: Zinc Plated

Specs & Features

• Sold Individually
  
• BILSTEIN gas-pressure technology
• BILSTEIN monotube / Upside-Down technology
• BILSTEIN snap ring ride height adjustment
• BILSTEIN OE quality
• BILSTEIN road test
• BILSTEIN zinc coating
• BILSTEIN lifting & fits lift kit
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Extremely affordable and practical alternative to coil spring spacers, with the benefit of BILSTEIN monotube technology
• Adjustable spring perch for vehicle lift up to 2.75in, depending on application
• Increases suspension travel
• Utilizes vehicle‘s stock front coil springs and OEM mounting hardware
• Made in the USA

Product Description

BILSTEIN B8 5100 RIDE HEIGHT ADJUSTABLE.

THE PERFECT HEIGHT.

Designed to level out the front of half-ton trucks and SUVs, the BILSTEIN B8 5100 Ride Height Adjustable is the perfect alternative to coil spring spacers.

Easy right height adjustment.

Lose no time on the trail – these shock absorbers use your vehicle‘s OEM coilover springs and mounting hardware for an easy, direct-fit installation.

Redline360 sells only new, genuine and authentic Bilstein products.